Sale of tatami for martial arts, ideal for Judo, Karate, Taekwondo, Kickboxing.

Menu

Tatami Puzzle Assembly

Preliminary information:

  • After opening the package, air the product for at least 24 hours before the use;
  • To avoid future deformations of the product, assembly the area in free spaces and keep at least 10cm away from fixed points (walls, columns, …);

Tatami area assembly (See diagrams below)

  1. Begin assembly from a corner of the room or area;
  2. Keep as a reference the single joint in the shape of an Arrow (See image 2);
  3. All the modules must have the same reference (Ex Img.1: if for the first piece the arrow is at the top right, for all the following the position to be kept will always be at the top right);
  4. The Tatami is reversible, just keep the position listed above;
  5. The area can be completed with the perimeter edges, using the same color (Ex: either all red or all blue).

fig_1.jpgfig_2.jpg

Tatami Puzzle Disassembly

The best method, to avoid damaging the product, is the “BY CUT” disassembly (as shown in the figure).

WARNING! Carefully avoid folding the tatami on itself during disassembly; this causes the teeth or the inner layer of the product to break.

smontaggio-si2-OPT.jpgsmontaggio-no2-OPT.jpg

Traditional Tatami Assembly

Transport the product keeping it STRAIGHT avoiding folding it;
Carefully place the Tatami on the ground, avoiding to drag it
AVOID contact with pointed or sharp objects and surfaces.

fig_3.jpgfig_4.jpg